Sony RDR-VXD655 Operating Instructions Manual page 98

9S
Black Level
Selects the black level (setup level) for the Video
Signals output from the LINE OUT Jacks
(page 21)
ThiS setting is not effective when the recorder
outputs progressive Signals
On RaIses the standard black level
-
Select thIS when the pIcture
appears too dark
Off Sets the black level of the output
SIgnal to the standard level
Picture Control
Selects the pIcture control for the VIdeo SIgnals
output from the LINE OUT Jacks (page 21)
You can adjust the VIdeo SIgnal ofDVD or
VIDEO CD (WIth PBC functIon oft) from the
recorder to obtain the pIcture qUalIty you want
Select the settIng that best SUItS the program you
are watchIng
DynamiC 1
Produces a bold dynamIC pIcture
by IncreasIng the picture contrast
and the color
DynamiC 2 Produces a more dynamiC pIcture
than "DynamiC 1" by further
increasing the picture contrast
and the color
Standard Displays a standard picture
(function turned oft)
Cinema 1
White colors become bnghter
and black colors become ncher,
and the color contrast is
increased
Cinema 2
Enhances detaIls in dark areas by
increasing the black level
Personal
Adjusts "Contrast," "Bnghtness,"
"Color," and "Hue" USing t/~1
"I"
..
~ .
Hint
When you watch a mOVie, "Cinema 1" or "Cinema 2" IS
recommended
Progressive
If your TV accepts progressIve
(48Op)
format
Signals, you will enJoy accurate color reproduction
and high qUality image
Connect your TV to the COMPONENT VIDEO
OUT Jacks (page
23)
On Set the recorder to output
progreSSIve SIgnals
Off
Outputs Video Signals in interlace
-
format
• If you select progreSSIve SIgnals when you connect the
recorder to a TV that cannot accept the signal In
progreSSIve fonnat, the Image qualIty WIll detenorate
In thts case, set "Progressive" to "Off" Or, press
DVD
to opt!rate the DVD recorder In stop mode, and then
hold down II PAUSE on the recorder for five seconds
or more
• When you connect your TV uSing an HDMI cable, the
"ProgreSSIve" setting IS set to "On"