Sony RDR-VXD655 Operating Instructions Manual page 163

step3
Record!
Record a TV Program using Timer
REC.
Playback the
Recorded VHS Tape
Playback the
Recorded DVD Disc
3
Press
t/...
to select the title you
want to play and press ENTER.
The sub-menu appears.
4
Press
t/...
to select "Play" and
press ENTER.
Playback starts from the beginning of the
title.
2
Press TITLE LIST.
The Title List menu appears.
1 Press DVD to operate the DVD
recorder.
Insert a tape with its safety tab
in place.
4
Press
The recorder starts recording. To stop
recording, press. STOP.
When recording to a VHS tape:
SP or EP
EP (Extended Play) provides recording time
three times as long as SP (Standard Play).
However, SP produces better picture and
audio quality.
3 Press REC MODE repeatedly to
select the recording mode.
When recording to a DVD disc:
HQ, HSP, SP, LSP, ESP, LP, EP, or SLP
HQ offers the best quality picture, but with
the shortest recording time. Recording time
increases with each successive mode, but
the picture quality gradually deteriorates.
Insert a VHS Tape
1
Press VIDEO to operate the
VCR.
2
Record a TV Program
2
Select a channel.
Digital and analog channels can be
toggled by pressing the DIGITAU
ANALOG button. If the current channel is
analog, pressing the DIGITAU ANALOG
button will select a digital channel.
Select your favorite program using the
number buttons.
For example, to select digital channel
number 011.1
G)-G)-O-G)-O
For example, to select analog channel
number Ch123
G)-0-0-0
Finally press the SET button.
You can also select a channel using the
CH+/- button.
Insert a DVD Disc
The following explains how to record
a current TV program. For instructions
on how to set the timer, see the timer
recording sections in the Operating
Instructions.
1 Press DVD to record to a DVD
disc.
Or, press VIDEO to record to a
VHS tape.
1
Press DVD to operate the DVD
recorder.
2
Press
~
OPEN/CLOSE and
place a recordable DVD on the
disc tray.
3
Press
~
OPEN/CLOSE again
to close the disc tray.
Wait until "LOAD" disappears from the
front panel display.
See "Quick Guide to Disc Types" in the
Operating Instructions for more details
about the differences between disc types.
1
Press TIMER.
The Timer menu appears.
2
Press
t/...
to set Media, Date,
Start and End time, Channel or
Input source and Rec Mode.
As for selecting "Ch(channel)", see above
"Record a TV program."
3
Press ENTER.
Leave the cable box/satellite receiver
turned on and do not change its selected
channel until the recorder finishes the
timer recording.
1
Press VIDEO to operate the VCR.
2
Press ...
/~
to find the point
you want to start playback.
For further explanations, see "VCR
Playback" in the Operating Instructions.
3
Press C> PLAY.
Playback starts.
Insert a source tape.
Cue the tape at the start
point, and press ~ VIDEO.
Insert a source disc.
Before dubbing, select the
recording mode and make the
necessary audio settings. For
details, see the dubbing section
in the Operating Instructions.
Select a title on the disc,
and press DVD ...
From DVD to
VHSTape
1
Insert a recordable tape.
2
3
Dub
From VHS Tape
to DVD
1
Insert a recordable disc.
2
3