Sony RDR-VXD655 Operating Instructions Manual page 31

The setup display for selectIng the picture size
of the connected TV appears
11
Select the seUlng that matches your TV
type
10
Select "Manual," and press ENTER
Press
t/~
to set the month and press" Set
the day, year, hour, minutes, and AMIPM In
the same way, then press ENTER The day of
the week IS set automatIcally
• If you used antenna hookup C (page 20),
you can select "Auto" The recorder will
automatIcally search for a channel that
carnes a time signal when you tum off the
recorder after finishing Easy Setup
13
Select the type of Dolby Digital signal you
want to send to your amplifier (receiver).
If your AV amphfier (receiver) has a Dolby
Digital decoder, select "Dolby Digital"
Otherwise, select "D-PCM "
14
Press ENTER
The setup display for selecting the type of
DTS signal appears
1010AM
DTS
On
_ EasySetup
1010AM
_ EasySetup
"16 9" For wide-screen TVs or standard TVs
with a wide screen mode
"4 3 Letter Box" For standard TVs
Displays "wide screen" pictures with bands
on the upper and lower sections of the screen
"4 3 Pan Scan" For standard TVs
AutomatIcally displays "wide screen"
pictures on the entue screen and cuts off the
sections that do not fit
For detatls, see "VIdeo Settings (VIdeo)" on
page 97
12
Press ENTER
The setup display for selectIng the type of
Dolby Digital signal appears
15
Select whether or not you want to send a
DTS signal to your amplifier (receiver),
and press ENTER.
If your AV amphfler (receiver) has a DTS
decoder, select "On " Otherwise, select "Off "
16
Press ENTER when" lFinlsh" appears
Easy Setup IS finished All connectIons and
setup operatIons are complete
Select your TV screen type
1v"16 9
4 3 LetterBox
4 3 PanScan
_ Easysetup
1010AM
_ EasySetup
Easy Setup
IS
fimshed
To return to the previous display
Press
cr-.
RETURN
1010AM
Dolby Digital
"t'''
Hint
If you want to run Easy Setup agaIn, select "Easy Setup"
In the "Setup" dIsplay (page 106)
Dolby Digital
To record TV programs uSIng the tImer, you must set the
clock accurately
31