Sony RDR-VXD655 Operating Instructions Manual page 75

NZmm meemlfmirilQ
1- '"
~
'" ,
Before Recording
Before you start recording
• ThIS VCR records In VHS format, not S-VHS
format
• Check that the tape IS longer than the recordIng
tIme (page 74)
• Timer recordings will start with or Without the recorder
turned on Once started, the recorder cannot be turned
off The recorder automatIcally turns off after a
recording has finished
• This recorder shares a single tuner for both the DVD
recorder and the VCR You cannot record different
programs to a DVD and a VHS tape at the same tIme
• This recorder has the copy guard functIon Programs
that contain a Copy-Never copy guard signal cannot be
correctly recorded on the VCR
To save a recording
To prevent accIdental erasure, break off the safety
tab as Illustrated To record on the tape agaIn,
cover the tab hole wIth adheSIve tape
Safety tab
Recording mode
"EP" (Extended Play) and "SP" (Standard Play) IS
avatlable for recordIng mode (tape speed) "EP"
provIdes recordIng tIme three tImes as long as
"SP" However, "SP" produces better pIcture and
audIO quahty
Maximum recording time
Tape Length SP EP
T-120 2 hrs 6hrs
T-160 2hrs40 mIns 8 hrs
T-180
3 hrs 9hrs
• Tapes recorded In EP
(x3)
mode by tills VCR cannot be
played back on VHS Video decks With SP mode only
• NOise may appear In the Image when tapes recorded In
EP (x3) mode by thiS VCR are played back on other
VHS Video decks With EP mode
Recording a stereo/SAP program
The recorder can receIve and record stereo/SAP
programs
When recordIng a dIgItal channel, only the
selected audIO can be recorded When recordIng
WIth the tImer, "Stream 1" IS usually recorded
(page 35)
Stereo programs
When a stereo program IS receIved, the
"STEREO" IndIcator hghts up In the front panel
dIsplay If there IS nOIse In the stereo program,
press AUDIO repeatedly untIl the "MONO"
appears on the TV screen The sound WIll be
recorded In monaural but WIth less nOIse
SAP (Second AudiO Program)
When a SAP IS receIved, the "SAP" IndIcator
hghts up In the front panel dIsplay To record only
SAP sound, set "Tuner AudIO" of "AudIO" to
"SAP" In the "Setup" dIsplay (page 99)
75