Sony RDR-VXD655 Operating Instructions Manual page 25

o
Connecting to audio l/R lacks
ThIS connectIon uses a stereo amphfIer's
(receIver's) two front speakers for sound
You can enJoy the surround functIon that creates
vIrtual speakers from two stereo speakers Select
"Surroundl," "Surround2," or "Surround3" In
"Surround" of "AudIO" setup (page 100)
Surround 1
Surround 2
Surround 3
Virtual speaker
Make sure that your lIstenIng posItion IS between and at
an equal dIstance from your speakers, and that the
speakers are located In slID1lar surroundIngs
e
Connecting to a digital audio Input lack
Use tills connectIon If your AV amphfier
(receIver) has a Dolby*l DIgItal or DTS*2 decoder
and a dIgItal Input Jack You can eDJoy the
surround effect of Dolby DIgItal (5 lch) or DTS
(5
lch)
*
1
Manufactured under lIcense from Dolby Laboratones
"Dolby" and the double-D symbol are trademarks of
Dolby Laboratones
*2
"DTS" and "DTS DIgItal Out" are trademarks ofDTS,
Inc
..
~ .
Hints
• For correct speaker location, see the operating
Instructions supplIed wIth the connected components
• Dunng VHS playback, the DIGITAL AUDIO OUT
jacks can also output dIgItal audIo SIgnals
-
• Dunng DVD recordIng, the DIGITAL AUDIO OUT
jacks or HDMI OUT jack output DVD audIo SIgnals
only You cannot hear VHS sound by pressIng VIDEO
• After you have completed the connection, make the
appropnate settings under "AudIO Connection Setup"
In Easy Setup (page 29) OtherwIse, no sound or a loud
nOIse WIll come from your speakers
• WIth a coaXIal or optical dIgItal connectIon, you cannot
use the vrrtual surround effects of tms recorder
• When outputtIng from the DIGITAL AUDIO OUT
jacks, you cannot sWItch the bIlIngual sounds on a
DVD-RW (VR mode) or DVD-R (VR mode) by
pressIng AUDIO
• When you connect the recorder to an AV amplIfier
(receIver) uSIng an HDMI cord, you WIll n'eed to do one
of the followIng
- Connect the AV amplIfier (receIver) to the TV WIth
anHDMIcord
- Connect the recorder to the TV wIth a vIdeo cord
other than HDMI cord (component vIdeo cord, S
VIDEO cord, or audIo/vIdeo cord)
• The HDMI OUT jack cannot output Dolby DIgItal
SIgnals for dIgItal broadcasts To hear Dolby DIgItal,
use the DIGITAL AUDIO OUT jacks
25