Bus Functional Model (Bfm); I/O Buffer Models; Flotherm* Model; Debug Features - Intel 440GX Design Manual

Contact your local Intel Field Sales representative to complete the proper software license
agreement and non-disclosure agreement required to receive the ITP.
4.2.3

Bus Functional Model (BFM)

A bus functional model for the Intel
party vendors and requires a special non-disclosure agreement. Contact your local Intel Field Sales
representative for information on the bus functional model vendors and to complete the appropriate
non-disclosure agreements.
4.2.4

I/O Buffer Models

IBIS Models are available from Intel for:
®
•
Intel
•
82443GX IBIS Models
•
PIIX4E PCI ISA IDE Xcelerator IBIS Models
Contact your local Intel Field Sales representative for a copy of these models and to complete the
appropriate non-disclosure agreements.
4.2.5 FLO THERM * Model
A FLOTHERM* Model is available for the Intel
4.3

Debug Features

These suggestions are for debug purposes only on initial prototype systems, and are not required
for production level systems. Some of these features may be desirable test functions that you may
incorporate onto production boards.
®
4.3.1 Intel
Note: If the LAI562 tool is not being used, this issue can be ignored. However, be aware that if you send
a system to Intel for debug, the absence of the required workarounds will prohibit
debugassistance from Intel.
To maintain backward compatibility with Intel
following circuitry to be considered. The LAI562 integration tool has been designed such that an
extra load will be presented on the CMOS signals connected to the Slot 1 connector. The following
list of signals are affected:
PREQ#, TCK, TDI, TDO, TMS, TRST#, INIT#, FLUSH#, STPCLK#, PICCLK, PICD[1:0]#,
LINT[0]/INTR, LINT[1]/NMI, IERR#, SMI#, PWRGOOD, THERMTRIP#, SLP#, FERR#,
IGNNE# and A20M#.
Figure 4-1
®
Intel 440GX AGPset Design Guide
®
Pentium II processor (QUAD only, IBIS models TBD)
®
Pentium II Processor LAI Issue
describes the CMOS probe signals of the LAI562.
® ®
Pentium II processor system bus is available from third
® ®
Pentium II processor.
® ®
Pentium II processor, Intel suggests the
Debug Recommendations
4-2