Additional Call Features - Mitel 1000 Owner's Manual

3. Select a free line and dial the external number.
4. When the call is answered, select 'Conference' on the
display.
An external conference call ties up two CO lines. If your system
only has 2 lines, incoming calls will get a busy signal until the
transferred call has cleared.
Note
At the start of a conference call a single tone is presented to all
parties to indicate that the call is a conference call.
Using your Desk Phone with a headset
Your Desk Phone is equipped with a socket for a Headset.
Plug a headset into the socket.
From your Desk Phone, press the PROGRAM Key
Select 'Headset Mode' and select 'Turn Headset On'. The phone is
now programmed to operate with a headset.
'Turn Headset Off?' is now displayed to allow you to revert to
handset mode.
If 'Turn Headset Off?' Is selected the menu updates to show 'Turn
Headset On?' You can turn the headset on and off as required.
To return the phone to normal operation, press the PROGRAM Key
and select 'Headset mode'. Select 'Turn Headset Off'
To make an internal or external call when using a headset
Press the Speakerphone Key and dial your calls in the normal way.
To clear down (end) a call when using headset
Press the Speakerphone Key.
To answer a call when using a headset
Select the 'Answer the call' option on the display, or press the
Speakerphone Key.

Additional Call Features

Redial
Use the Redial feature to redial the external number you most
recently dialed. A line is selected automatically.
To redial the last external number dialed
From the Idle Menu, select 'Redial last number'.
Saved Number Redial
In addition to the Last external number the previous 5 numbers
dialed are also stored and may be redialed.
From the Idle Menu, select 'Saved Numbers'.
Select the number to be dialed.
34