Mitel 1000 Owner's Manual page 70

To have Night Service remain on over weekends
The Weekend Service feature ensures that if 'Night Service' is
invoked on a Friday evening, the switch remains in 'Night Service'
until Monday morning.
From the Programming Extension, press the PROGRAM Key
Press the Scroll Down Key ( ) until 'System programming' is
displayed.
Select 'System programming'.
Enter the System Programming Password and select 'System'.
Press the Scroll Down Key ( ) until 'Night Service' is displayed.
Select 'Night Service'.
Select 'Weekend service'. A ♦ symbol indicates the service is on
and a ◊ symbol indicates it is turned off.
Press the Speakerphone Key to finish programming
To cancel Weekend service, repeat as above, selecting 'Weekend
service off' as the last step.
System Time/Date
To set the time and date on the system
From the Programming Extension, press the PROGRAM Key
Press the Scroll Down Key ( ) until 'System programming' is
displayed
Select 'System programming'.
Enter the System Programming Password and select 'System'.
Select 'Time and date'.
Enter the correct time in 24-hour format, (e.g. 2pm as 1400). The
display will prompt for a date.
If you only wish to set the time select 'Confirm' and the display will
revert to the Idle Menu.
Enter the date in mm/dd/yy format, (e.g. 10 December 1999 as
121099). When the date has been entered the display will revert to
the Idle Menu.
Press the Speakerphone Key to finish programming.
In the event of a power failure, you will need to reset the time and
date.
Changes to the system Time will only take place when any external
calls in progress at that time have cleared.
If Caller ID is supplied on a CO line the system time will be updated
by the first incoming external call after 0200 hours.
Hold Options
When an external call is placed on hold, you can choose between
supplying music, a tone, or silence to the caller. The music source
is internal, and it is integrated into the system and cannot be
changed.
To supply music, tone or silence to callers on hold
From the Programming Extension, press the PROGRAM Key
Press the Scroll Down Key ( ) until 'System programming' is
displayed.
Select 'System programming'.
Enter the System Programming Password and select 'System'.
70