Snmp > Communities; Base Table - Linksys SRW208 User Manual

Chapter 5
performed via HMAC-SHA-96 authentication.
Define the local user password. Local user
Password
passwords can contain up to 159 characters.
Defines the HMAC-MD5-96 or
Authentication Key
HMAC-SHA-96 authentication level. The authentication
and privacy keys are entered to define the authentication
key. If only authentication is required, 16 bytes are defined.
If both privacy and authentication are required, 32 bytes
are defined. Each byte in hexadecimal character strings is
two hexadecimal digits. Each byte can be separated by a
period or a colon.
Defines the Privacy Key (LSB). If only
Privacy Key
authentication is required, 20 bytes are defined. If both
privacy and authentication are required, 36 bytes are
defined. Each byte in hexadecimal character strings is
two hexadecimal digits. Each byte can be separated by a
period or colon.
The Add to List button adds the Group Membership
configuration to the respective table at the bottom of the
screen.
SNMP > Communities
The screen
Communities
Communities, Basic Table and Advanced Table.
SNMP > Communities
SNMP Management Station
station IP address for which the advanced SNMP
community is defined. There are two definition options:
Define the management station IP address.
Includes all management station IP addresses.
All
Defines the password used to
Community String
authenticate the management station to the device.
8-Port 10/100 Ethernet Switch with Webview
contains three areas,
Defines the management
Advanced Configuration
Enables SNMP Basic mode for a selected community
Basic
and contains the following fields:
Defines the access rights of the community.
Access Mode
The possible field values are:
Management access is restricted to read-
Read Only
only, and changes cannot be made to the community.
Management access is read-write and
Read Write
changes can be made to the device configuration, but
not to the community.
User has access to all device
SNMP Admin
configuration options, as well as permissions to modify
the community.
Contains a list of user-defined SNMP views.
View Name
Enables SNMP Advanced mode for a selected
Advanced
community and contains the following fields:
Defines advanced SNMP communities
Group Name
group names.
The Add to List button adds the Communities
configuration to the respective Table at the bottom of the
screen.

Base Table

Displays the management station
Management Station
IP address for which the basic SNMP community is
defined.
Displays the password used to
Community String
authenticate the management station to the device.
Displays the access rights of the
Access Mode
community.
Displays the user-defined SNMP view.
View Name
SNMP > Table
50