Table of Contents
Advertisement
Chapter
SNMP > Communities
SNMP > Communities
Community ID
Select the Community ID number you
would like to configure from the pull-down window.
Create Community
Use this button to add a new SNMP
Community.
Community ID
Click on the Community ID to edit or
remove the SNMP Community.
Community String
Displays the community string of the
SNMP Community.
Remote Station IP
Displays the management IP address
of the SNMP Community.
Group Name
Displays the group name to which the
SNMP Community belongs to.
SNMP > Communities > Add SNMP Community
SNMP Community (Create Community)
Community String
Indicates the Community String of
the SNMP Community.
Remote Station IP
Indicates the management IP address
of the SNMP Community
Group Name
Indicates the group name to which the
SNMP Community belongs to.
24-Port 10/100 + 2-Port 10/100/1000 Gigabit Advanced Smart Switch with 2 Combo SFPs
Advanced Configuration
SNMP > Notification Settings
SNMP > Notification Settings
Trap Station ID
Select the Trap Station ID number you
would like to configure from the pull-down window.
Create Trap Station
Use this button to create a new
SNMP Trap Station.
Trap Station ID
Click on Trap Station ID to edit or remove
SNMP Trap Station.
Remote IP Address
Displays the IP address to which the
traps are sent.
Community String
Displays the community string of the
SNMP Trap Station.
Boot Up Trap
Indicates if WarmStart and ColdStart traps
are sent.
Link Change Trap
Indicates if LinkUp and LinkDown
traps are sent.
Version
Indicates the SNMP version of the trap.
SNMP > Notification Settings > Add SNMP Trap Station
SNMP Trap Station (Create Trap Station)
Remote IP Address
Indicates the IP address to which the
traps are sent.
Hide quick links:
Advertisement
Table of Contents
