Statistics > Rmon Events; Add Event - Linksys SRW208 User Manual

Chapter 5
Displays the RMON statistics for the selected
Port
port.
Displays the RMON statistics for the selected
LAG
LAG.
Displays the selected MIB variable.
Counter Name
Defines the sampling method for the
Sample Type
selected variable and comparing the value against the
thresholds. The possible field values are:
Compares the values directly with the
Absolute
thresholds at the end of the sampling interval.
Subtracts the last sampled value from the
Delta
current value. The difference in the values is compared
to the threshold.
Displays the rising counter value that
Rising Threshold
triggers the rising threshold alarm. The rising threshold
is presented on top of the graph bars. Each monitored
variable is designated a color.
Displays the mechanism in which the alarms
Rising Event
are reported. The possible field values are:
Indicates there is not a saving mechanism for
LOG
either the device or in the management system. If the
device is not reset, the entry remains in the Log Table.
Indicates that an SNMP trap is generated, and
TRAP
sent via the Trap mechanism. The Trap can also be
saved using the Trap mechanism.
Indicates that both the Log and Trap mechanism
Both
are used to report alarms.
Displays the falling counter value that
Falling Threshold
triggers the falling threshold alarm. The falling threshold
is graphically presented on top of the graph bars. Each
monitored variable is designated a color.
Displays the mechanism in which the
Falling Event
alarms are reported. The possible field values are:
Indicates there is not a saving mechanism for
LOG
either the device or in the management system. If the
device is not reset, the entry remains in the Log Table.
Indicates that a SNMP trap is generated, and
TRAP
sent via the Trap mechanism. The Trap can also be
saved using the Trap mechanism.
Indicates that both the Log and Trap mechanism
Both
are used to report alarms.
Displays the trigger that activates the
Startup Alarm
alarm generation. Rising is defined by crossing the
threshold from a low-value threshold to a higher-value
threshold.
Defines the alarm interval time in seconds.
Interval
8-Port 10/100 Ethernet Switch with Webview
Advanced Configuration
Displays the device or user that defined the
Owner
alarm.
The Add to List button adds the RMON Alarms Table
entry.
The Alarm Table area contains the following additional
field:
Displays the current counter value for the
Counter Value
particular alarm.
Statistics > RMON Events
An RMON Event determines the action to take when an
alarm is triggered. The response to an alarm can include
logging the alarm or sending an SNMP trap message. If
the response corresponding to an alarm has not yet been
defined, use the RMON Event screen to configure the Event
Setting table.
Statistics > RMON Events

Add Event

Displays the event.
Event Entry
Displays the community to which the event
Community
belongs.
Displays the user-defined event description.
Description
Describes the event type. Possible values are:
Type
Indicates that no event occurred.
None
Indicates that the event is a log entry.
Log
Indicates that the event is a trap.
Trap
Indicates that the event is both a log
Log and Trap
entry and a trap.
Displays the device or user that defined the
Owner
event.
29