Security > Acl Binding; Security > Radius - Linksys SRW208 User Manual

Chapter 5
The MAC Based ACL screen allows a MAC based ACL to be
defined. ACEs can be added only if the ACL is not bound
to an interface.
Displays the user-defined MAC based ACLs.
ACL Name
Specifies a new user-defined MAC based
New ACL Name
ACL name.
Deletes the selected ACL.
Delete ACL
Indicates the ACL forwarding action. Possible field
Action
values are:
Forwards packets which meet the ACL
Permit
criteria.
Drops packets which meet the ACL criteria.
Deny
Drops packet that meet the ACL criteria,
Shutdown
and disables the port to which the packet was
addressed.
Matches the source MAC address
Source MAC Address
to which packets are addressed to the ACE.
Defines the source IP address wildcard
Wildcard Mask
mask. Wildcard masks specify which bits are used and
which bits are ignored. A wild card mask of 255.255.255.255
indicates that no bit is important. A wildcard of 0.0.0.0
indicates that all the bits are important. For example, if the
source IP address 149.36.184.198 and the wildcard mask
is 255.36.184.00, the first eight bits of the IP address are
ignored, while the last eight bits are used.
Matches the destination MAC
Dest. MAC Address
address to which packets are addressed to the ACE.
Defines the destination IP address
Wildcard Mask
wildcard mask.
Matches the packet's VLAN ID to the ACE. The
VLAN ID
possible field values are 2 to 4094.
Specifies the packet's Ethernet type.
Ether Type
The Add to List button adds the configured MAC Based
ACLs to the MAC Based ACL Table at the bottom of the
screen.
8-Port 10/100 Ethernet Switch with Webview
Advanced Configuration
Security > ACL Binding
Security > ACL Binding
When an ACL is bound to an interface, all the ACE rules that
have been defined are applied to the selected interface.
Whenever an ACL is assigned on a port or LAG, flows
from that ingress interface that do not match the ACL are
matched to the default rule, which is Drop unmatched
packets.
Indicates the interface to which the ACL is
Interface
bound.
Indicates the ACL which is bound to the
ACL Name
interface.
The Add to List button adds the ACL Binding configuration
to the ACL Binding Table at the bottom of the screen.
Security > RADIUS
Security > RADIUS
33