Port Management > Link Aggregation; Link Aggregation Detail - Linksys SRW208 User Manual

Chapter 5
Indicates that the port speeds and
Max Capability
duplex mode settings can be accepted.
Indicates that the port is advertising a 10Mbps
10 Half
half duplex mode setting.
Indicates that the port is advertising a 10Mbps
10 Full
full duplex mode setting.
Indicates that the port is advertising a
100 Half
100Mbps half duplex mode setting.
Indicates that the port is advertising a
100 Full
100Mbps full duplex mode setting.
Indicates that the port is advertising a 1000Mbps
1000
full duplex mode setting.
Current Advertisement
capabilities to its neighbor port to begin the negotiation
process. This field displays the current advertisement
settings.
Neighbor Advertisement
to which the selected interface is connected) advertises
its capabilities to the port to start the negotiation process.
This field displays the neighbor's current settings.
The Back Pressure feature of the selected
Back Pressure
port can be enabled or disabled.
Displays whether Back Pressure is
Current Back Pressure
enabled or disabled on the currently selected port.
The Flow Control feature of the selected
Flow Control
port can be enabled or disabled.
Displays whether Flow Control is
Current Flow Control
enabled or disabled on the currently selected port.
Select the Auto setting if you want the port
MDI/MDIX
to automatically detect the cable type. Select MDI if the
port is connected to an end station. Select MDIX if the
port is connected to a hub or another switch.
This is the current MDI/MDIX status
Current MDI/MDIX
of the port.
When a port is a Private VLAN Edge (PVE) port,
PVE
it bypasses the Forwarding Database and forwards all
unicast, multicast, and broadcast traffic to an uplink.
PVE does not apply to the SRW208.
NOTE:
Click the Save Settings button to save your changes.
8-Port 10/100 Ethernet Switch with Webview
The port advertises its
The neighbor port (the port
Advanced Configuration
Port Management > Link Aggregation
Port Management > Link Aggregation
This indicates if the port is part of a LAG.
LAG
Description for this LAG.
Description
The admin status of the LAG. Up indicates
Admin Status
that the LAG is available. Down indicates that administrator
has taken the port offline. When modifying the option, be
sure to click the Save Settings option.
The type of LAG is displayed here.
Type
The link status is displayed here.
Link Status
The connection speed is displayed here.
Speed
The connection duplex is displayed here.
Duplex
This is the flow control status of the LAG. It
Flow Control
is active when the port uses Full Duplex Mode.
Displays the LAG status, On, Off, or Not
LAG Mode
Present.
The Detail button opens up the Link
Detail button
Aggregation Detail screen.

Link Aggregation Detail

LAG Configuration
The number of the selected LAG.
LAG
A general description can be listed here for
Description
reference.
Indicates if the LAG is in LACP (Link Aggregation
LACP
Control Protocol) mode.
The port types that comprise the LAG.
LAG Type
Enables or disables traffic
Administrative Status
forwarding through the selected LAG.
22