Out Of Proile Dscp; Policy Name; New Class Map - Linksys SRW208 User Manual

Chapter 5
Out of Profile DSCP
Advanced Mode > Out of Profile DSCP
Displays the DSCP In value.
DSCP In
Displays the current DSCP out value. A new
DSCP Out
value can be selected from the pull-down menu.
The Policy Settings button opens the Policy Name
screen.

Policy Name

Advanced Mode > Policy Name
Defines a new Policy name.
Policy Name
The Add to List button will add the policy to
Add to List
the Policy Name table.
Selects an existing Policy by name. The
Select Policy
Policy can be comprised of:
Class Map
Action
Policer
Defines a new Policy name.
New Policy Name
Selects an existing Class Map by name.
Class Map
The New Class Map button opens the

New Class Map

New Class Map screen.
8-Port 10/100 Ethernet Switch with Webview
Advanced Configuration
New Class Map
Advanced Mode > New Class Map
Defines a new Class Map name
Class Map Name
Indicates if packets are first matched to
Preferred ACL
an IP based ACL or a MAC based ACL. The possible field
values are:
Matches packets to IP based ACLs first,
IP Based ACLs
then matches packets to MAC based ACLs.
Matches packets to MAC based
MAC Based ACLs
ACLs first, then matches packets to IP based ACLs.
Matches packets to IP based ACLs first, then
IP ACL
matches packets to MAC based ACLs.
Criteria used to match IP addresses and /or MAC
Match
addresses with an ACL's address.The possible field values
are:
Both the MAC-based and the IP-based ACL must
And
match a packet.
Either the MAC-based or the IP-based ACL must
Or
match a packet.
Matches packets to MAC based ACLs first, then
MAC ACL
matches packets to IP based ACLs.
Enables Policer functionality.
Police
Policer type for the class. Possible values are:
Type
Configures the class to use a
Aggregate Policer
configured aggregate policer selected from the drop-
down menu. An aggregate policer is defined if the
policer is shared with multiple classes. Traffic from two
different ports can be configured for policing purposes.
An aggregate policer can be applied to multiple classes in
the same policy map, but cannot be used across different
policy maps.
Configures the class to use manually configured
Single
information rates and exceed actions.
User-defined aggregate policers.
Aggregate Policer
40