Qos Tab - Advanced Mode; Figure 5-40: Qos - Advanced Mode; Figure 5-41: Advanced Mode - Out Of Profile Dscp; Figure 5-42: Advanced Mode - Policy Name - Linksys SRW2016 User Manual

WebView Switches

QoS Tab - Advanced Mode

Advanced QoS mode provides rules for specifying flow classification and assigning rule actions that relate to
bandwidth management. The rules are based on the Access Control Lists (see Access Control Tab). This feature
has been added to version 1.2 of the SRW2024/SRW2016 and version 1.1 of the SRW224G4/SRW248G4.
MAC ACLs and IP ACLs can be grouped together in more complex structures, called policies. Policies can be
applied to an interface. Policy ACLs are applied in the sequence they appear within the policy. Only a single policy
can be attached to a port.
In advanced QoS mode, ACLs can be applied directly to an interface in the Security - ACL Binding. However, a
policy and ACL cannot be simultaneously applied to an interface.
After assigning packets to a specific queue, services such as configuring output queues for the scheduling

Figure 5-40: QoS - Advanced Mode

scheme, or configuring output shaping for burst size, CIR, or CBS per interface or per queue, can be applied.
Out of Profile DSCP Assignments. This button opens up the Out of Profile DSCP screen.
Out of Profile DSCP screen
DSCP In. Displays the DSCP In value.
DSCP Out. Displays the current DSCP out value. A new value can be selected from the pull-down menu.
The Policy Settings button opens the Policy Name screen.

Figure 5-41: Advanced Mode - Out of Profile DSCP

Policy Name screen
Policy Name. Defines a new Policy name.
Add to List. The Add to List button will add the policy to the Policy Name table.

Figure 5-42: Advanced Mode - Policy Name

Chapter 5: Using the Web-based Utility for Configuration 66
QoS Tab - Advanced Mode