Installing Board With Screw - Fujitsu Siemens Computers SCENIC S 2 Operating Manual

Ê
Close the casing (see "Closing the casing").
If you have installed or removed a PCI board, please check the relevant PCI slot settings
i
in the BIOS Setup. If necessary, change the settings. Further information is provided in the
PCI board documentation.

Installing board with screw

Ê
Open the casing (see "Opening the casing").
Ê
Remove the screw (1).
Ê
Remove the cover plate from the slot (2).
Do not dispose of the cover plate. For cooling, protection against fire and in order to
!
comply with EMC regulations, you must refit the cover plate if you remove the board.
Ê
Take the new board out of its packaging.
Ê
Make the required settings for the board.
A26361-K650-Z100-1-7619
1
System expansions
43