Installing And Removing A Board; Removing The Board Holder; Installing The Board Holder - Fujitsu Siemens Computers Esprimo C Operating Manual

System expansions

Installing and removing a board

!
Please take note of the section "Information about boards".
If you want to install a board, you have to follow the steps below.
●

Removing the board holder

● Installing a board
●

Installing the board holder

You will learn more about the individual steps in the following sections.
Removing the board holder
► Open the casing (see "Opening the casing").
Installing the board holder
a
34
a
a
► Pull the board holder out of the casing in
the direction of the arrow.
► Insert the board holder in the direction of
the arrow into the three tongue slots (a) of
the casing until it engages.
A26361-K1009-Z120-1-7619, edition 4