Installing And Removing Drives; Installing And Removing The Drive Cage - Fujitsu Siemens Computers SCENIC S 2 Operating Manual

System expansions

Installing and removing drives

Installing and removing the drive cage

Ê
Open the casing (see "Opening the casing").
Removing the drive cage
1
Ê
Loosen the screws (1).
Ê
Disconnect the cables between the hard disk drive and the mainboard at the hard disk drive.
The drive cage rests on the front cover in a guide with its longitudinal side facing the front cover.
Ê
Grasp the drive cage by the edge (2), fold it into an angled position and hold it in this position.
48
2
1
3
A26361-K650-Z100-1-7619