Connecting The Pc To The Mains Voltage - Fujitsu Siemens Computers SCENIC S 2 Operating Manual

Connecting the PC to the mains voltage

Connecting the PC to the mains voltage
1 = Notch for inserting the screwdriver
Ê
Check the voltage setting.
The value marked with an arrow must agree with the local mains voltage:
!
115 = 100 V to 127 V
If the voltage setting is incorrect:
Ê
Lift out the manual voltage adjuster with a screwdriver (1), turn it to the required setting and
replace it.
Ê
First connect the power cable to the PC (1) and then to the mains supply (2).
A26361-K650-Z100-1-7619
Preparation for use and operation
1
230 = 200 V to 240 V
1
2
17