Changing The Floppy Disk Drive - Fujitsu Siemens Computers SCENIC S 2 Operating Manual

System expansions

Changing the floppy disk drive

Ê
Open the casing (see "Opening the casing").
Ê
Remove the drive cage (see "Installing and removing the drive cage").
Ê
Turn over the drive cage and place it on a flat surface with the accessible drives facing upward.
Ê
Remove the screws (1).
Ê
Pull the drive out of the drive cage (2).
Ê
Take the new drive out of its packaging.
Ê
Slide the drive into the drive cage (1).
Ê
Fasten the drive into place with the screws (2).
52
1
2
A26361-K650-Z100-1-7619