Installing a board
►
Open the casing (see "Opening the casing").
►
Remove the fan casing if necessary (see "Remove the fan").
1
►
Remove the screw (1).
►
Remove the rear slot cover plate from the slot (2).
Do not dispose of the cover plate. If you remove the board again, you must reinstall the
i
rear slot cover plate (cooling, fire protection or EMC regulations to be complied with).
The top and the lowest slot are suitable for low-profile cards with an adapter.
►
Take the new board out of its packaging.
►
Make the required settings for the board.
A26361-K1008-Z120-1-7619, edition 1
2
System expansions
33