Removing Board With Screw - Fujitsu Siemens Computers SCENIC S 2 Operating Manual

Removing board with screw

Ê
Open the casing (see "Opening the casing").
Ê
Disconnect the cables connected to the board.
a
2
Ê
Remove the screw (1).
Ê
Press the retainer of the slot on the mainboard in the direction of the arrow (2) until the locking
lug (a) is released and hold it down.
Ê
Pull the board evenly out of the slot (3).
Ê
Release the retainer.
Ê
Place the board into appropriate packaging.
For cooling, protection against fire, and in order to comply with EMC (electromagnetic
!
compatibility) regulations, you must refit the cover plate.
A26361-K650-Z100-1-7619
1
System expansions
45