Connecting Devices - Fujitsu Siemens Computers SCENIC S 2 Operating Manual

Connecting devices

Connecting devices
The power plug must be disconnected!
!
Do not connect or disconnect cables during a thunderstorm (risk of electric shock).
Always take hold of the actual plug. Do not pull the cable which could damage the plug or
the socket!
i
Read the documentation on the external device before connecting it.
Connect and disconnect the cables in the order described below.
Connecting cables
•
Turn off all power and equipment switches.
•
Unplug all power plugs from the mains supply.
•
Plug all connectors of power and data communication cables into the utility sockets of the PC
and peripherals. Under all circumstances, please observe the safety notes provided in the
"Important notes" chapter.
•
Plug all data communication connectors into the utility sockets.
•
Plug all power cables into the mains supply.
Disconnecting cables
•
Turn off all power and equipment switches.
•
Unplug all power plugs from the mains supply.
•
Unplug all data communication connectors from the utility sockets.
•
Unplug all cables from the PC and peripherals.
A26361-K650-Z100-1-7619
Preparation for use and operation
13