Changing The Cd-Rom Drive - Fujitsu Siemens Computers SCENIC S 2 Operating Manual

Ê
Install the drive cage (see "Installing and removing the drive cage").
Ê
Close the casing (see "Closing the casing").
i
You may have to check the entry for the drive in the BIOS Setup.

Changing the CD-ROM drive

Ê
Open the casing (see "Opening the casing").
Ê
Remove the drive cage (see "Installing and removing the drive cage").
Ê
Turn over the drive cage and place it on a flat surface with the accessible drives facing upward.
Ê
Remove the screws (1).
Ê
Pull the drive out of the drive cage (2).
Ê
Take the new drive out of its packaging.
A26361-K650-Z100-1-7619
1
System expansions
1
53