Wrong monitor has been set under Windows 2000
Ê
Restart the PC.
Ê
If the message Starting Windows appears, press function key [F8].
The Windows 2000 Advanced Options Menu appears.
Ê
Select Safe Mode or Safe Mode with Network.
Ê
Set the correct values for the attached monitor by selecting Start - Settings - Control Panel -
Display - Settings.
The wrong RAM modules have been inserted
See the technical manual for the mainboard for information on which memory modules can be used.
Flickering stripes across the monitor
!
Switch off the PC immediately.
Monitor does not support the set horizontal frequency
Ê
Find out which horizontal frequency your monitor screen supports. You will find the horizontal
frequency (also known as line frequency or horizontal deflection frequency) in the
documentation of your monitor.
Ê
Refer to the documentation of your operating system or the corresponding driver software for
the graphics card for instructions on how to set the correct horizontal frequency for your
monitor, and follow the procedure accordingly.
No screen display or display drifts
The wrong horizontal frequency and/or resolution has been selected for the monitor or for
the application programme.
Ê
Find out which horizontal frequency your monitor screen supports. You will find the horizontal
frequency (also known as line frequency or horizontal deflection frequency) in the
documentation of your monitor.
Ê
Refer to the documentation of your operating system or the corresponding driver software for
the graphics card for instructions on how to set the correct horizontal frequency for your
monitor, and follow the procedure accordingly.
A26361-K650-Z100-1-7619
Troubleshooting and tips
31