Opening The Casing - Fujitsu Siemens Computers SCENIC S 2 Operating Manual

System expansions

Opening the casing

Ê
Switch the PC off.
Please take note of the safety information in the "Important notes" chapter.
!
Remove the plug from the mains outlet so that the system is totally disconnected from the
electricity supply!
Ê
If any cables attached to the PC are obstructing you, remove the connectors from the PC.
Remove any anti-theft protection devices installed. If necessary, unlock the casing (see
"Locking/Unlocking the PC").
Ê
Place the casing in a convenient working position.
Ê
Unlock the casing by sliding the tab on the locking slide (1) to the left in the direction of the
arrow ("open").
Ê
Push the top cover in the direction of the arrow (2) until the distance (a) is
approximately 10 mm.
Ê
Lift off the top cover in an upward direction (3).
36
a
A26361-K650-Z100-1-7619