Changing Operating Position To Vertical Or Horizontal - Fujitsu Siemens Computers SCENIC S 2 Operating Manual

Setting up the PC

Changing operating position to vertical or horizontal

Aligning the logo (if desired):
Ê
Open the casing (see "Opening the casing").
Ê
Release the locking lugs on the front cover.
Ê
Remove the front panel by lifting it upwards.
Ê
Press the logo carrier out of the front cover from behind.
Ê
Remount the logo carrier in the correct orientation.
Ê
Position the lower edge of the front cover on the casing.
Ê
Engage the locking lugs of the front cover.
Ê
Close the casing (see "Closing the casing").
Changing operating position to vertical:
Ê
Secure the stand-up feet to the base plate. Please note:
−
The locking lugs on the stand-up feet (c) must engage in the corresponding guides in the
base plate (a).
−
The engaging hook on the base plate (b) must engage in the grid structure on the stand-
up feet.
A26361-K650-Z100-1-7619
Preparation for use and operation
a
a
b
b
c
c
9