Removing Jammed Staples From The Saddle Stitcher Unit - Canon imageRunner 6020 Reference Manual Reference Manual

7
7

Removing Jammed Staples from the Saddle Stitcher Unit

If a staple jam occurs, a screen similar to the one shown below appears on the
touch panel display. Follow the procedure described below to remove any jammed
staples.
IMPORTANT
Before removing any jammed staples, remove all output sheets from the booklet tray.
7-32 Finisher-F1/Saddle Finisher-F2/Puncher Unit-B1
Push the entire saddle stitcher unit back into the finisher, and
close the lower front cover.
CAUTION
When closing the cover, be careful not to get your fingers caught, as this
may result in personal injury.
IMPORTANT
Once you have replaced the staple cartridge, be sure to reposition the staples in
the saddle stitcher unit. (See "Staple Repositioning for the Saddle Stitcher Unit," on
p. 3-61.)