Canon imageRunner 6020 Reference Manual Reference Manual page 288

4
4-64 Setting Forwarding Conditions (Forwarding Settings)
q If you select [Address Book]:
❑
Select the forwarding destination © press [OK].
If Access Number Management for an Address Book is set to 'On', press
[Access Number] © enter the access number using
specify the destination © press [OK]. If you do not want to specify an access
number, press [No Access Number]. (See Chapter 4, "Registering/Editing
Address Book Settings," in the Sending Guide.)
Press the alphabet keys (e.g., [ABC]) to display the range of entries.
If the desired destination is not displayed, press [w] or [v] to scroll to the
desired destination.
Press the Type drop-down list to restrict the type of addresses displayed in the
list.
Press the Address Book drop-down list to display a list of subaddress books
(1 to 10 or One-touch Buttons). The subaddress books categorize the
addresses stored in the Address Book.
You cannot select multiple destinations.
NOTE
•
To cancel the specified destination, select the destination again.
•
To view more detailed information about an address, press [Details].
•
To be able to select a forwarding destination, it is necessary to register addresses
in the Address Book beforehand. (See Chapter 4, "Registering/Editing Address
Book Settings," in the Sending Guide.)
(numeric keys) ©
-
0 9