Setting The Low-Power Mode Time - Canon imageRunner 6020 Reference Manual Reference Manual

2
3
3

Setting the Low-Power Mode Time

If the machine is not operated (no keys are pressed) for a certain period of time
after prints have been made or a key operation performed, the machine
automatically enters the Low-power mode. You can easily change the time it takes
for the machine to enter the Low-Power mode.
NOTE
The default setting is '15 minutes'.
1
3-58 Setting the Timer (Timer Settings)
Select the day of the week © enter the time using
(numeric keys) © press [OK].
Enter the time in 24-hour notation, as four digits without a space.
Examples: 7:05 a.m. © 0705
11:18 p.m. © 2318
If you make a mistake when entering the time, select the day of the week again ©
enter a four digit number.
You can also press (Clear) to clear the incorrect values.
C
The selected mode is set.
Press [Done] repeatedly until the Basic Features screen
appears.
(Additional Functions) © [Timer Settings].
Press
-
0 9