Selecting the Default Display after Auto Clear
You can set whether the screen specified as the Initial Function is displayed after
Auto Clear initiates.
NOTE
•
The time delay for Auto Clear can be set. (See "Setting the Time for the Display to Return
to the Basic Features Screen after Finishing Operations," on p. 3-54.)
•
The default setting is 'Initial Function'.
1
3
3-10
Setting Specifications That Are Common to Each Function (Common Settings)
(Additional Functions) © [Common Settings] © [Auto
Press
Clear Setting].
NOTE
If the desired setting is not displayed, press [w] or [v] to scroll to the desired
setting.