Canon imageRunner 6020 Reference Manual Reference Manual page 258

3
4
4-34 Specifying the Communications Settings (Communications Settings)
Set the Maximum Data Size For Sending.
❑
Press [Maximum Data Size For Sending].
❑
Press [–] or [+] to specify the maximum data size for sending.
You can set the Maximum Data Size for Sending from 0 to 99 MB in 1 MB
increments.
You can also use -
9
0
your entries.
IMPORTANT
The maximum data size for sending must not be greater than the maximum data
size of the mail server. Contact your System Administrator for details.
NOTE
•
If you enter '0 MB' as the data size, there is no size limit on the data that is sent.
You can send messages without limiting the data size.
•
The data size limit can be set in 1 MB increments. If the size of an e-mail message
exceeds the set limit, the e-mail message is split up by page and sent out as
smaller e-mail messages, each of which is within the set limit. I-fax data that
exceeds the set limit is handled as an error, and is not sent.
(numeric keys) to enter values, and (Clear) to clear
C