Canon imageRunner 6020 Reference Manual Reference Manual page 103

The paper size/type currently loaded and the paper size/type that is reserved are
displayed, as shown below.
NOTE
•
If [Free Size] is selected, [Transparency] cannot be selected.
•
If there is more than one reserved job waiting to print, only the paper size/type
specified for the last reserved job will be shown here and on the Basic Features
screen. For example, if the current job is using LTR plain paper from the stack
bypass, the first reserved job will use LTRR plain paper, the second reserved job
will use LGL plain paper, the third reserved job will use 11" x 17" plain paper, and
the fourth reserved job will use STMTR plain paper. The paper size/type that is
shown here and on the Basic Features screen is STMTR plain paper.
5
Press [Done].
This completes the reserved settings for the paper you plan to load into the stack
bypass.
6
Press (Start).
When printing documents stored in an inbox, press [Start Print].
3
Start
6
9
Clear
C
Stop
Making Prints Using the Stack Bypass
Paper Size/Type Specified
for the Reserved Job
Paper Size/Type
Currently Loaded
1
1-71