2
Press [w] or [v] until [LTRR/STMT Original Selection] appears
© press [LTRR/STMT Original Selection].
3
Select [Distinguish Manually], [Use LTRR Format], or [Use
STMT Format] © press [OK].
[Distinguish Manually]: If you place an LTRR or STMT original on the platen glass,
a screen enabling you to select the original size appears when scanning.
[Use LTRR Format]: If you place an LTRR or STMT original on the platen glass,
the machine detects the original as LTRR.
[Use STMT Format]: If you place an LTRR or STMT original on the platen glass,
the machine detects the original as STMT.
The selected mode is set.
4
Press [Done] repeatedly until the Basic Features screen
appears.
Setting Specifications That Are Common to Each Function (Common Settings)
3
3-23