Performing Send Jobs; Changing The Destination - Canon imageRunner 6020 Reference Manual Reference Manual

Performing Send Jobs

You can change the destination of the send job or resend a job that had an error.

Changing the Destination

You can change the destination of a send job from the System Monitor screen.
IMPORTANT
•
Destinations can be changed only for send standby jobs set with delayed send, or jobs
2
which have been canceled from sending due to an error.
•
To change the address of a job with a send error, set Erase Failed TX to 'Off' from the
Additional Functions screen. (See Chapter 3, "Setting/Storing the Communications
Settings," in the Sending Guide.)
•
Multiple destinations cannot be changed at the same time. Also, sending destinations
within a group cannot be changed at one time.
•
If there is any job being processed or in the Send queue that has the same job number
as the destination you want to change, the change cannot be made (except for Delayed
Send jobs).
•
You cannot check the status of send jobs specified from MEAP applications, because
these jobs are not displayed.
NOTE
•
You cannot change the destination type. For example, you cannot make changes so that
the jobs sent to an e-mail address are sent to an I-fax address.
•
If you want to send the document to an inbox, you cannot change the inbox number.
1
2
2-14 Checking Job Details
Press [System Monitor] © [Send].
Press [Status] © select the job to be changed © press
[Details].