Canon imageRunner 6020 Reference Manual Reference Manual page 85

4
Enter the password © press [OK].
You can also enter the password using
q If SSO is set as a login service, the screen below is displayed:
❑
Enter the user name, password, and DNS domain name.
IMPORTANT
•
To use SSO, SA (Security Agent) is required.
•
Domain names are being fixed, therefore you cannot enter them at this time.
•
If there is more than a 30 minute difference between the current time set in the
computer register by the Active Directory and the time set on the machine, an error
occurs when you log on using SSO. To be able to log on using SSO, it is necessary
to match the current time on both the computer and the machine. For instructions
on setting the current date and time of the machine, see Chapter 3, "Customizing
Settings."
•
You must use the user login name (pre-Windows 2000) registered in Active
Directory in order to then enter a user name for SSO authentication.
•
You must use characters other than the following to enter a user name for SSO
authentication:
/ \ [ ] : ; | = , + * ? < >
You can log in only if you use valid characters.
Logging in through the Authentication Screens of SDL and SSO
- (numeric keys).
9
0
1
1-53