Jumper Settings - DFI-ITOX LT600-DR User Manual

2
Hardware Installation

Jumper Settings

Clear CMOS Data
If you encounter the following,
a) CMOS data becomes corrupted.
b) You forgot the supervisor or user password.
you can reconfigure the system with the default values stored in the
ROM BIOS.
To load the default values stored in the ROM BIOS, please follow
the steps below.
1. Power-off the system and unplug the power cord.
2. Set JP5 pins 2 and 3 to On. Wait for a few seconds and set JP5
back to its default setting, pins 1 and 2 On.
3. Now plug the power cord then power-on the system.
24
1
2
3
1-2 On: Normal
(default)
1
2
JP5
3
2-3 On:
Clear CMOS Data