Serial Ata Connectors - DFI-ITOX LT600-DR User Manual

Serial ATA Connectors

• SATA speed up to 3Gb/s
• RAID 0, RAID 1, RAID 0+1 and RAID 5 (LT600-DR only)
Connecting Serial ATA Cables
Connect one end of the Serial ATA cable to a Serial ATA connector
and the other end to your Serial ATA device.
BIOS Setting
Configure the onboard Serial ATA in the Integrated Peripherals
submenu ("OnChip IDE Device" section) of the BIOS. Refer to chap-
ter 3 for more information.
Configuring RAID (LT600-DR only)
The system board allows configuring RAID on Serial ATA drives.
Refer to chapter 5 for steps in configuring RAID.
Hardware Installation
SATA 3
SATA 2
SATA 1
SATA 0
7 1
2
43