DFI-ITOX LT600-DR User Manual page 34

2
Hardware Installation
USB Ports
USB 1
USB 3 USB 0
USB 2
1 0
2
1 9
USB 4-5
USB 6-7
USB allows data exchange between your computer and a wide
range of simultaneously accessible external Plug and Play peripherals.
The system board is equipped with four onboard USB 2.0/1.1 ports.
The USB 4-5 and USB 6-7 connectors allow you to connect 4
additional USB 2.0/1.1 ports. The additional USB ports may be
mounted on a card-edge bracket. Install the card-edge bracket to an
available slot at the rear of the system chassis then insert the con-
nector (that is attached to the USB port cables) to a USB connec-
tor.
BIOS Setting
Configure USB in the Integrated Peripherals submenu ("Onboard
Device" section) of the BIOS. Refer to chapter 3 for more informa-
tion.
34