DFI-ITOX LT600-DR User Manual page 81

EPP Mode Select
This field is used to select the EPP mode.
ECP Mode Use DMA
This field is used to select a DMA channel for the parallel por t. The
options are 1 and 3. Default setting: 3.
PWRON After PWR-Fail
Off
On
Former-Sts
When power returns after an AC power fail-
ure, the system's power is off. You must press
the Power button to power-on the system.
When power returns after an AC power fail-
ure, the system will automatically power-on.
When power returns after an AC power fail-
ure, the system will return to the state where
you left off before power failure occurs. If the
system's power is off when AC power failure
occurs, it will remain off when power returns.
If the system's power is on when AC power
failure occurs, the system will power-on when
power returns.
3
BIOS Setup
81