Integrated Peripherals; Onchip Ide Device - DFI-ITOX LT600-DR User Manual

3
BIOS Setup

Integrated Peripherals

↑↓→←
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.

OnChip IDE Device

Move the cursor to this field and press <Enter>. The following
screen will appear.
x SATA Mode
x SATA Port Speed Settings
x PATA IDE Mode
↑↓→←
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
72
Phoenix - AwardBIOS CMOS Setup Utility
OnChip IDE Device
Onboard Device
Super IO Device
: Move Enter: Select
Phoenix - AwardBIOS CMOS Setup Utility
IDE HDD Block Mode
IDE DMA Transfer Access
On-Chip Primary PCI IDE
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
On-Chip Secondary PCI IDE
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Secondary Master UDMA
IDE Secondary Slave UDMA
On-Chip Serial ATA Setting
***
On-Chip Serial ATA
SATA Port
: Move Enter: Select
Integrated Peripherals
Press Enter
Press Enter
Press Enter
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
OnChip IDE Device
Enabled
Enabled
Enabled
Auto
Auto
Auto
Auto
Enabled
Auto
Auto
Auto
Auto
***
IDE
Auto
Disabled
Primary
P1, P3 is Secondary
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level
If your IDE hard drive
supports block mode
Select Enabled for
automatic detection of
the optimal number of
block read/writes per
sector the drive can
support
ESC: Exit F1: General Help
F7: Optimized Defaults