System Memory - DFI-ITOX LT600-DR User Manual

Warning:
.
.
.
.
.
.
.
.
Electrostatic discharge (ESD) can damage your system board, proces-
sor, disk drives, add-in boards, and other components. Perform the
upgrade instruction procedures described at an ESD workstation only.
If such a station is not available, you can provide some ESD protec-
tion by wearing an antistatic wrist strap and attaching it to a metal
part of the system chassis. If a wrist strap is unavailable, establish
and maintain contact with the system chassis throughout any proce-
dures requiring ESD protection.

System Memory

The four DDR2 DIMM sockets on the system board are divided into
2 channels:
Channel A - DDR2-1 and DDR2-2
Channel B - DDR2-3 and DDR2-4
Hardware Installation
DDR2-1
DDR2-2
DDR2-3
DDR2-4
2
15