DFI-ITOX LT600-DR User Manual page 11

SERIAL ATA
3Gbps, it improves hard drive performance faster than the standard
parallel ATA whose data transfer rate is 100MB/s. LT600-DR allows
configuring RAID on Serial ATA drives. It supports RAID 0, RAID 1,
RAID 0+1 and RAID 5.
gigabit lan
The system board is equipped with an IrDA connec-
irda
tor for wireless connectivity between your computer
and peripheral devices. The IRDA (Infrared Data Association) specifi-
cation supports data transfers of 115K baud at a distance of 1
meter.
The system board supports USB 2.0 and USB 1.1
USB
ports. USB 1.1 supports 12Mb/second bandwidth
while USB 2.0 suppor ts 480Mb/second bandwidth providing a
marked improvement in device transfer speeds between your com-
puter and a wide range of simultaneously accessible external Plug
and Play peripherals.
pci express
speeds by forming multiple lanes. The system board currently sup-
ports the physical layer of x16 lane widths. The x16 PCI Express
lane supports transfer rate of 4 Gigabytes per second.
wake-on-ring
wake-up/power-on to respond to calls coming from an external mo-
dem or respond to calls from a modem PCI card that uses the PCI
PME (Power Management Event) signal to remotely wake up the
PC.
Important:
The 5V_standby power source of your power supply must sup-
port ≥ 720mA.
Serial ATA is a storage interface that is compliant
with SATA 1.0 specification. With speed of up to
The two Realtek PCI Express Gigabit LAN con-
trollers support up to 1Gbps data transmission.
PCI Express is a high bandwidth I/O infra-
structure that possesses the ability to scale
This feature allows the system that is in the
Suspend mode or Soft Power Off mode to
Introduction
1
11