Table of Contents
Advertisement
3. ADJUSTMENTS
3.6.5 Running simulation program
The simulation mode provides simulated operation to help acquaint users with the many
features of the Navpilot. It allows you to view and control a simulated autopilot without
position-fixing equipment. Most controls are operative so you may practice using the
Navpilot. You may turn the simulation mode on or off as follows:
Available steering mode
Available operation
1. Open the SYSTEM SETUP menu.
2. Rotate the course control knob to select "SIMULATION MODE".
3. Press the course control knob to show the simulation mode options window.
4. Rotate the course control knob to select ON or OFF as appropriate.
5. For "ON", enter the course value manually using the course control knob.
6. Press the course control knob.
In the simulation mode, the message "SIM" blinks on any display. Note that when turning
the power of while the simulation mode is on, you will be asked at the next power-up if you
want to continue the simulation mode.
3-26
WARNING
Do not use the SIMULATION mode on
the boat.
The rudder may move. This is special-
purpose mode for technicians.
AUTO, NAV, DODGE mode
Heading, Rudder angle, Alarms, Waypoint switch, Wind data,
Depth, Speed, Time
OFF
ON
Simulation mode options window
STBY
Simuration mark
SIM
HDG
M
RUDDER
Simulation mark (ex. STBY mode)
359.9
0
20 10
40
40
10
20
Hide quick links:
Advertisement
Table of Contents
