2. WIRING
2.1
Wiring System
All units are connected to the processor unit. The cables should be separated as far as
possible from cables carrying radio frequency or pulsed signals. At least one meter
separation is recommended.
Power supply
12-24 VDC
Solenoid valve
Reversible pump
Hydraulic
linear drive
Processor unit FAP-5002
Remote
PC
controller
NMEA OUT
or
(FI-30 etc.)
Distributor
NMEA IN
(FI-30 etc.)
NMEA IN/OUT
(FI-30 etc.)
Distributor
*Attach the terminator to the empty connector of the last control unit in the series.
Wiring
MJ-A7SPF0012-100C
MJ-A7SPF0010-
100C (supplied)/
150C (option)/
200C (option)
MJ-A7SPF0010-100
PG-500
Rudder
reference
indicator
FAP-6112
Remote
controller
or
Terminator MJ-A7SPF0011*
Terminator MJ-A7SPF0011*
(supplied)
Control unit
FAP-6011
(supplied)
2-1