When Receiving A Digital Call - Icom IC-V82 Instruction Manual

11
DIGITAL MODE OPERATION
D D When calling the desired station
(continued from p. 45 step t)
y Select the desired station call sign.
- Push [Y Y ] or [Z Z ] several times to select the call sign select
mode.
• "yUC" appears.
- Push [0•opt] then rotate [VOL] to select the desired call
sign (pre-programmed), or set the desired call sign. (see
p. 44)
- Push [✱• ] to exit
ENT
uPush and hold [PTT] to transmit and speak into the micro-
phone at normal voice level.
• Transmit indicator appears and the RF meter shows the output power.
i Release [PTT] to return to receive.
• The other station call sign will be received.
• Received call signs can be stored into the received call record
automatically (see next set of instructions).
46
.
OPTION SET MODE

■ When receiving a digital call

When an individual station call is received, the calling station
call sign can be stored into the received call record.
The record is cleared once the transceiver is turned OFF.
D D Received call record
q Push [A•
] then [0•
FUNC OPT
then push [Y Y ] or [Z Z ] several times to select the received
call indication.
• "RXC.AL," "RSC.AL," "R1C.AL," and "R2C.AL" are available for
the received station call sign, station call sign note, repeater 1
and repeater 2 call signs, respectively.
w To confirm the received call, push and hold [0•
sec. to enter the received call sign indication mode.
] to enter
OPTION SET MODE
] for 1
OPT
,