Tuning Step Selection - Icom IC-V82 Instruction Manual

4
BASIC OPERATION
D By other methods
Via the [Y Y ]/[Z Z ] keys
➥ Push [Y Y ] or [Z Z ] several times to set the desired frequency.
• Each push increases/decreases the frequency by the selected
tuning step. See next set of instructions for setting tuning step
size.
D Tuning step selection
The IC-V82/U82 has 8 tuning
steps— 5, 10, 12.5, 15, 20, 25, 30
and 50 kHz. The tuning step is selec-
table in .
SET MODE
qPush [A•
] then [8•
FUNC
enter .
SET MODE
wPush [Y Y ] or [Z Z ] several times to
select the tuning step item.
eRotate [VOL] to select the desired tuning step.
r Push [✱•
] to exit
ENT
14
[VOL]
] to
SET
.
SET MODE
✔ For your information— [VOL] function assignment
The [VOL] control can be used as
a tuning dial for frequency tuning
instead of [Y Y ]/[Z Z ] keys. However,
when [VOL] functions as tuning
dial, [Y Y ]/[Z Z ] keys functions as
volume control.
qWhile pushing [Y Y ] and [Z Z ],
turn power ON to enter
.
SET MODE
w Push [Y Y ] or [Z Z ] several times
to select the dial assignment
item, "tOP."
e Rotate [VOL] to select the condition.
A
FUNC
ENT
8
[VOL] is assigned as
SET
AF volume control.
r To exit
SET MODE
INITIAL
[VOL] is assigned as
tuning dial.
, push [✱•
].
ENT
[VOL]
PWR
ENT