Receiving; D Receiving An Individual Call (Default Setting); D Recalling A Memorised Receive Selcall Code; D When Receiving A Group Call - Icom IC-41W Instruction Manual

8
SELCALL (Selective Calling)

Receiving

■
D Receiving an individual call (default setting)
"PiRo" beeps sound.
➥
The received code channel name/number is displayed
➥
➥ ë" and the displayed channel info blink, and Selcall mute "
is released when quiet mode is activated.
While pushing and holding [PTT], speak into the micro-
➥
phone at a normal voice level.
Blink
NOTE:
• When the ID decode function is activated, the received
ID code is displayed instead of the channel name, and
memorised by the transceiver. The ID decode function
can be activated via the CS-41S
• RX code means the receiving SelCall made. A maximum
of 8 RX code channels can be pre-programmed into the
transceiver using the optional CS-41S
.
ware
• Various settings and conditions can be set for when an
individual call is received via the optional CS-41S
ing software
26
cloning software
cloning soft
. See the help file for more details.
D Recalling a memorised receive selcall code
Push [Top] to enter the function mode, then push and hold
q
for 2 seconds to display the memorised RX code.
Push [CH Up] or [CH Down] to select the desired RX
w
code.
Push [Top] to enter the function mode, then push and hold
e
for 2 seconds to transmit the code to the selected
channel.
NOTE: Up to 8 receive code channels, and the receive
condition, can be programmed via the CS-41S cloning
software. Consult the CS-41S help file for more informa-
tion.
D When receiving a group call:
"PiPi" tone sounds.
➥
➥ ë" and "GROUP" blink, and Selcall mute is released
"
.
when quiet mode is activated.
While pushing and holding [PTT], speak into the micro-
➥
phone at a normal voice level.
-
-
clon
Blink
➥ The group receive condition can be set via the CS-41S
cloning software
information.
. Consult the CS-41S help file for more