Setting Audio/Squelch Level; Receive And Transmit - Icom IC-V82 Instruction Manual

■ Setting audio/squelch level

D To set the audio level
Rotate [VOL] to set the desired
audio level while receiving a sig-
nal.
• When no signal is received, push
and hold [MONI] while setting the
audio level.
• When [VOL] is assigned as tuning
dial, push [Y Y ]/[Z Z ] to adjust the audio
output level. (pgs. 14, 65)
D To set the squelch level
While pushing [MONI], push
[Y Y ]/[Z Z ] to set the squelch level.
• The squelch level "1" is loose
squelch, "10" is tight squelch.
• When [VOL] is assigned as tuning
dial, rotate [VOL] while pressing
[MONI]. (pgs. 14, 65)

■ Receive and transmit

q Push and hold [PWR] for 1 sec. to turn the power ON.
w Adjust audio volume to the desired level.
[VOL]
e Set the frequency.
When a signal is received:
• Squelch opens and audio is emitted from the speaker.
• Signal indicator shows the relative signal strength level.
rPush [A•
FUNC
tween high, middle and low.
• "L" appears when low power is selected.
• "M" appears when middle power is selected.
• No indication appears when high power is selected.
t Push and hold [PTT] to transmit, then speak into the micro-
phone.
• "$" appears.
• Do not hold the microphone too close to your mouth or
speak too loudly. This may distort the signal.
y Release [PTT] to receive.
✔ For your information— Monitor function:
Push and hold [MONI] to listen to weak signals that do not
open the squelch.
MONI
BASIC OPERATION
], then [9• ] to select output power be-
H/M/L
4
4
15