Optional Units; Optional Ut-108/118 Installation; Optional Mb-86 Installation - Icom IC-V82 Instruction Manual

■ Optional UT-108/118 installation

q Remove the optional connector access cover.
• Unscrew two screws and remove the optional connector cover.
w Attach the optional unit. Insert
the connector firmly to avoid a
bad contact.
• Remove the paper baking of the
optional unit before installing.
e Replace the optional connector
cover and two screws.
r Program the necessary infor-
mation from the transceivers
keypad or using the cloning
software, before operation.

■ Optional MB-86 installation

D MB-86 stopper
D MB-86 belt clip
e
When clipping to a part of your belt
w

OPTIONAL UNITS

Supplied screws
14
When releasing
13
14
73